What size file do I need for a 3/8 chain? (2023)

That depends on the type of chain you are looking for and the desired strength rating. In general, for a 3/8 inch chain, you will need a file which is slightly larger than the chain’s inner and outer diameters.

This will ensure that the chain fits together properly and has the desired strength rating. For example, if you are looking for a Grade 80 or Grade 100 chain, then the inner and outer diameters of the chain should be 0.

489 inches and 0.687 inches respectively. For such a chain, it is advisable to use a file which is 0.500 inches wide as this will safely ensure that the chain is properly connected together. If, on the other hand, you are looking for a standard Grade 30 chain with an inner diameter of 0.

437 inches and an outer diameter of 0.687 inches, then the file size should be slightly larger at 0.450 inches. In conclusion, the exact file size you need for a 3/8 inch chain depends on the desired strength rating, so it is best to consult a specialist when making your selection.

What is the most common chainsaw file?

The most commonly used chainsaw file is a round file, and it is most often used to sharpen the teeth of chainsaw chain. A round file is a type of file that is cylindrical in shape and is used to sharpen the edges of the chain and the cutters.

Generally, the file size should match the chain size, as larger files will take off more material than necessary. When using the round file, it is important to use a guide to ensure that the file is at the correct angle relative to the cutter.

Additionally, the file should be moved across the cutters in an even and consistent manner.

How do you measure a chainsaw tooth?

Measuring the size of a chainsaw tooth is an important step in making sure your chainsaw is running at peak performance. To measure the size of your chainsaw tooth, you’ll need a ruler or caliper. First, it’s important to understand different dimensions of a tooth.

There are two dimensions you need to measure: The distance from the base of the tooth to the chisel, and the width of the chisel. To measure the distance from the base of the tooth to the chisel, begin at the base of the tooth, at the tip of the chisel.

Measure from the point where the tooth meets the chain up to the point at the tip of the chisel. This is the pitch distance. To measure the width of the chisel, take the caliper and measure the width of the chisel at the point where it meets the chain.

This measurement should be taken from the outside to the inside edge of the chisel. Once you have both measurements, you can identify the size of the saw tooth. It’s important to note these measurements in case you need to replace the saw tooth in the future.

What is the difference between .325 and 3/8 chain?

The difference between. 325 and 3/8 chain is that. 325 is a type of chain, whereas 3/8 is a size. 325 chain is a chainsaw drive link pattern that is commonly used in chainsaws, trimmers, and other outdoor power equipment.

3/8, on the other hand, is the thickness (or gauge) of the link; it is measured in inches. This is a crucial feature, as it determines how much weight the chain can carry. A 3/8-inch chainsaw chain is commonly used for heavier-duty cutting and will require more power and force to cut through the material than a light-duty.

325-inch chain. Therefore, the 3/8-inch chain offers greater strength and durability than other sizes.

What pitch is a .325 chainsaw chain?

A. 325 chainsaw chain is a popular pitch size for chainsaws. It is a standard size for many professional grade chainsaws and is well-suited for a wide range of demanding jobs. It measures 0.325 of an inch between three consecutive drive links and is suitable for medium-power chainsaws.

325 chains are used for precision cutting of hardwoods, softwoods, and other materials. They are a good choice for hobbyists and homeowners as well as professional arborists and tree care professionals.

The pitch is also recommended for cutting firewood and construction materials like concrete and masonry. This pitch size can also be used to trim and prune thick branches, limbs, and even small tree trunks. The.

325 pitch is one of the most popular pitch sizes amongst chainsaw manufacturers, offering chains that are strong and durable while providing precise cutting.

What do the numbers on an Oregon chainsaw chain mean?

The numbers on an Oregon chainsaw chain indicate a variety of characteristics that are important to consider when selecting the right chainsaw chain for your cutting job. The first number typically indicates the pitch of the chain, which is the distance between the drive links.

This is often listed as a number and a letter, such as 3/8-inch, 0.325-inch, or 3/8-044. The next number indicates the gauge of the drive links- in other words, the thickness of the metal used for the drive links.

This number is typically in decimal form, such as 0.05 or 0.06. After that, a number is given for the number of drive links in the chain, such as 56 or 63. Finally a letter code may be given indicating the type of chain, such as A, B, C, or K (for safety chain).

The letter code is usually followed by a number, such as A-80, which indicates the compatibility with a particular saw as well as other features like the number of teeth on the cutter. It’s important to select a chainsaw chain that is compatible with your saw and suited for the job at hand.

How can I tell what gauge my chain is?

To determine the gauge of your chain, you will need to measure the pitch, or the distance between the pins in the links of the chain. A basic bike chain consists of two side plates, a pin, and a roller.

To measure the pitch, begin at the roller on one side of the chain. Measure the distance from the center of the pin on the side you started from to the center of the next pin in the chain. Repeat the process from other side and the rollers should be opposite each other when the pitch is properly determined.

To make sure you have a correct measurement, you should check the measurement at a few other points in the chain. The most common chain pitches are 1/2-inch (or 1/8-inch), 3/32-inch, and 11/128-inch.

Once you have your measurement, simply compare it to the chart of the most common chain gauges.

How do I know what size chain is on my Stihl chainsaw?

To identify the size of the chain on your Stihl chainsaw, you will first need to locate the model number of your chainsaw. You will find this information on your manual, as well as on the casing of your Stihl chainsaw.

Once you have the model number, you can look up your chainsaw online, or contact an authorized Stihl dealer, to determine the size of the chain. When looking up the chainsaw online, look for the specifications associated with the size and type of chain.

Additionally, you will be able to find information regarding compatible chainsaw bars, as well as the correct sprocket size. It is important to purchase the correct parts for your Stihl chainsaw, as the incorrect size could cause the chainsaw to malfunction.

How do you use a bar mounted chainsaw file guide sharpener?

A bar mounted chainsaw file guide sharpener is an essential tool to keep your chainsaw chain in tip-top shape. It’s designed to create a precise, sharp edge to ensure your chain slices through wood efficiently.

Using the chainsaw file guide sharpener is simple and straightforward. To get started, you’ll first need to determine the cutters’ size and depth. This is usually marked on the guide itself, and sometimes on the saw manufacturer’s website.

Once you have determined the size and depth of your cutters, you’ll need to loosen the screws on the guide to adjust it to the proper size.

When ready, slide the guide onto the bar and push it in so that the guide is flush with the bar’s surface. Then, tighten the screws and secure it in place.

Next, you’ll need to select the correct file size and insert it into the guide. Use a flat file to sharpen the edges of the cutters, then turn the round file to sharpen the inside of the cutters. Once finished, remove the file and check the chain’s sharpness.

If the chain is still dull, repeat the process until it is sharp.

Finally, once the chain is sharpened, use a file cleaner or wire brush to clean any debris and sawdust that has accumulated in the cutters. Properly cleaning the cutters after sharpening helps to ensure the longevity of the chain and allows it to retain its sharpness.

How do I know what chainsaw file to use?

Choosing the right chainsaw file comes down to several factors, including the size of the chain, the gauge of the teeth and the size of the file. When selecting a chainsaw file, you should determine the type of chain being used, the pitch, and the gauge.

The pitch of the chain is the distance between three rivets, divided by two. A higher number corresponds to a longer pitch, while a lower number indicates a shorter pitch. The gauge of the teeth is also important to consider, as a file that’s too small for the gauge will not only fail to sharpen the chain, but may also damage or de-temper the blade.

Finally, the size of the file is determined by the depth of the gullet, the space between the cutting edge and the depth gauge of the chain. If the file is too small, it can’t properly sharpen the chain, while a file that’s too large can cause the teeth to become too aggressive and potentially cause the chain to break.

Once you’ve identified the correct numbers, you should be able to find the correct chainsaw file for the job.

How do you use the Oregon bar and chain measuring tool?

The Oregon Bar and Chain measuring tool is a handy device that allows you to accurately and quickly measure the length of your chainsaw bar and chain. The tool consists of two pieces: a gauge and a ruler.

The gauge is designed to fit snugly onto the cutting teeth of the chain, while the ruler provides a standardized measuring system.

To use the Oregon Bar and Chain measuring tool, first place the gauge onto the cutting teeth of your chainsaw and make sure that the gauge is perfectly aligned. Next, take the ruler and place it over the gauge so that the markings on the ruler are lined up with the teeth of the chain.

You can then read the measurement on the ruler and this will give you the chain’s length. It is important to measure the chain in multiple places and record the measurements, as chains may have a slight variation in length from one end to the other.

Once you have the length of your chain, you can use it to determine the correct size bar for your saw. It is important to note that different manufacturers’ bars and chains may have different sizes, so it is always best to double-check the information provided by your chainsaw’s manufacturer to ensure compatibility.

Using the Oregon Bar and Chain measuring tool is quick and easy, and it will help you to make sure that you purchase the correct size bar and chain for your saw.

Top Articles
Latest Posts
Article information

Author: Prof. Nancy Dach

Last Updated: 12/09/2023

Views: 5644

Rating: 4.7 / 5 (57 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Prof. Nancy Dach

Birthday: 1993-08-23

Address: 569 Waelchi Ports, South Blainebury, LA 11589

Phone: +9958996486049

Job: Sales Manager

Hobby: Web surfing, Scuba diving, Mountaineering, Writing, Sailing, Dance, Blacksmithing

Introduction: My name is Prof. Nancy Dach, I am a lively, joyous, courageous, lovely, tender, charming, open person who loves writing and wants to share my knowledge and understanding with you.